Polaris 2014 ATV Sportsman Big Boss 6x6 - Manual (Page 45)

43
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
Downloading Codes
The EFI diagnostic mode is for informational purposes only. Please see
your POLARIS dealer for all major repairs.
See page 45 for Blink Codes and Failure Descriptions. Use the
following procedure to download blink codes (failure codes) from the
EFI module.
1. Place the transmission in park.
2. Stop the engine.
3. Turn the key switch to the ON position.
4. Turn the key switch off and on three times in less than five seconds,
then leave the switch on. Any blink code numbers stored in the EFI
module will display, one at a time, on the screen. The number “61”
and the word “END” displays after all codes have been transmitted.