Polaris 2014 ATV Sportsman 400 HO - Manual (Page 88)

86
MAINTENANCE
Transmission Oil
Oil Change
1. Remove the fill plug.
2. Place a drain pan under the gearcase. Remove the drain plug. Allow
the oil to drain completely.
3. Clean and reinstall the drain plug. Torque to specification.
4. Add the proper amount of the recommended oil.
5. Reinstall the fill plug. Torque to specification.
6. Check for leaks.
7. Dispose of used oil properly.
Front Gearcase (Demand Drive) Fluid
Always check and change the demand drive fluid at the intervals
outlined in the Periodic Maintenance Chart beginning on page 74.
Maintain the fluid level at the bottom of the fill hole threads. See page
129 for the part numbers of POLARIS products.
Fluid Recommendations
The fill plug is located on
the right side of the
demand drive unit. The
drain plug is located on the
bottom right side of the
unit.
Gearcase Lubricant Capacity Fill Plug
Torque
Drain Plug
Torque
Front
Gearcase
Demand Drive Fluid 9 oz.
(265 ml)
8-10 ft. lbs.
(11-14 Nm)
11 ft. lbs.
(15 Nm)
Drain Plug
Fill
Plug
Fill Level