Polaris 2014 ATV Sportsman 400 HO - Manual (Page 48)

46
OPERATION
Starting the Engine
1. Position the vehicle on a level surface outdoors or in a well-
ventilated area.
2. Place the transmission in PARK.
3. Lock the parking brake.
Tip: The starter interlock will prevent the engine from starting if the transmission
is in gear and the brake is not engaged.
4. Turn the fuel valve on.
5. Sit on the vehicle.
6. Do not use the choke if starting a warm engine. Excessive use of the
choke can cause the spark plug to become wet fouled.
7. If the engine is cold, pull the
choke knob out until it stops.
Tip: The variable choke is fully on
when the knob is pulled
completely out. The choke is off
when the knob is pushed
completely in. The choke can be
adjusted gradually, depending on
how much choke is needed for
starting. Be sure the choke is off
during operation, as excess fuel
washing into the engine oil will
increase wear on engine
components.
8. If the knob doesn't stay where
positioned, increase the
tension by rotating the tension
adjusting nut clockwise.
9. Move the engine stop switch to RUN.
10. Do not press the throttle while starting the engine.
Tension
Adjusting Nut