Maintenance, Caution, Warning – Polaris 2007 ATV Sawtooth User Manual

Page 79: Spark plugs

MAINTENANCE

Spark Plugs

Spark Plug Recommendaitons

Refer to the specifications section beginning on page 104 for spark plug

and gap specifications.

Plug Condition

Torque Specification

New Spark Plug

9-11 ft. lbs. (12-15 Nm)

Previously Installed Spark Plug

17-20 ft. lbs. (23-27 Nm)

CAUTION

Using non-recommended spark plugs can result in serious engine

damage. Always use Polaris-recommended spark plugs.

Spark Plug Inspection

Spark plug condition is indicative of engine operation. The spark plug

firing end condition should be read after the engine has been warmed

up and the vehicle has been driven at higher speeds. Immediately

check the spark plug for correct color.

Spark Plug Removal and Replacement

WARNING

A hot exhaust system and engine can cause serious burns. Wear

protective gloves when removing a spark plug for inspection.

1. Remove the spark plug cap (A).
2. Using the special

wrench provided in the

tool pouch, rotate the

spark plug

counterclockwise to

remove.

3. Reverse the procedure

for spark plug installation.

Torque to specification.