Grass Valley TTN-BRS-0808 - Manual (Page 15)

BRS-0808 Rev. 2
7
5. Router configuration
5.1. Router level
Switch 1 - 4 on the configuration switch set the router’s level for communication with the
Triton - Router Control System, and other units in the NCB system. The panels on the NCB dedicated to
operate with the router must be configured to the same level as that router.
If several routers are combined to form an Audio Follow Video, RGB or similar system, these routers
must be configured to the same level.
The levels can be switched according to the following pattern:
- means switch down
* means switch up
Default level is 1.
Switch
1 2 3 4 Level
- - - - 1
- - - * 2
- - * - 3
- - * * 4
- * - - 5
- * - * 6
- * * - 7
- * * * 8
* - - - 9
* - - * 10
* - * - 11
* - * * 12
* * - - 13
* * - * 14
* * * - 15
* * * * 16
5.2. Control mode
The BRS-0808 router can be assigned to either the video layer or the audio layer of a matrix system. With
switch 7 on the configuration switch you can set BRS-0808 to be controlled as either video or as audio.
- means switch down
* means switch up
Switch
7 Mode
- Controlled as audio
* Controlled as video
Default mode is controlled as audio.