Grass Valley TTN-CP-32GPI - Manual (Page 20)

CP-32GPI Rev. 3
14
6.3 Output connector pin-out:
Connector type DB25 female.
Output 01
- Pin 12
Output 02 - Pin 24
Output 03 - Pin 23
Output 04 - Pin 10
Output 05 - Pin 09
Output 06 - Pin 21
Output 07 - Pin 20
Output 08 - Pin 07
Output 09 - Pin 06
Output 10 - Pin 18
Output 11 - Pin 17
Output 12 - Pin 04
Output 13 - Pin 03
Output 14 - Pin 15
Output 15 - Pin 14
Output 16 - Pin 01
The GPI outputs are of open collector type. An output can switch a maximum load of 100mA at 30V.
Any device to be controlled by the GPI outputs (lamp, LED or similar) needs to be connected to an
external supply voltage on one end and to the GPI output on the other end.
Warning ! Do not connect external supply voltages higher than 30V DC.