Grass Valley TTN-CP-32GPI - Manual (Page 15)

CP-32GPI Rev. 3
9
5.2 Configuring output
The fourth Dip-switch Block, bottom right, SW1 (8 user switches):
Switches 3 - 8 on the configuration switch define the router output for the control panel. For normal
32x32 operation SW1.3 should always be OFF (down).
The outputs can be switched according to the following pattern:
- means switch OFF (down)
* means switch ON (up)
Default output is 1.
Switch 3 4 5 6 7 8 Output
- - - - - - 1
- - - - - * 2
- - - - * - 3
- - - - * * 4
- - - * - - 5
- - - * - * 6
- - - * * - 7
- - - * * * 8
- - * - - - 9
- - * - - * 10
- - * - * - 11
- - * - * * 12
- - * * - - 13
- - * * - * 14
- - * * * - 15
- - * * * * 16
- * - - - - 17
- * - - - * 18
- * - - * - 19
- * - - * * 20
- * - * - - 21
- * - * - * 22
- * - * * - 23
- * - * * * 24
- * * - - - 25
- * * - - * 26
- * * - * - 27
- * * - * * 28
- * * * - - 29
- * * * - * 30
- * * * * - 31
- * * * * * 32
* - - - - - 33