Grass Valley TTN-CP-UNI - Manual (Page 19)

CP-UNI Rev. 2
11
7.3 Main screen
Input slider Input text Output text Output slider
Export button
Import button Option menu Status display
UNI-Soft will start-up with 32 in- outputs as default. To change this you have to define the desired router
size under OPTION. Please see chapter 7.4 for reference. On the main screen you can edit both in- and
output text in the white text fields. Selecting in- and outputs is done with the sliders beside the text fields.
Pressing the EXPORT TO DISPLAY button will export the text information and other data generated
under OPTION to the CP-UNI display. The STATUS DISPLAY gives information about the LEVEL, the
router SIZE selected, the COMPORT selected and the filename the set-up will be stored under using
SAVE in the FILE menu.
You can save an unlimited number of set-ups using SAVE AS in the FILE menu. Use OPEN file to get
access to the set-ups you have saved earlier.
Pressing the IMPORT FROM DISPLAY button will import all information stored in the CP-UNI. In case
of any changes please import data from the panel first, make the desired changes and export the revised
data to the panel using the EXPORT TO DISPLAY button.