Grass Valley Trinix Back-Up Power Supplies Apr 13 2010 - Manual (Page 30)

30 Trinix — Back-Up Power Supplies Installation Manual
Section 4 — Introduction
Software Required
No software changes are required.
Specifications
For mechanical, environmental, and electrical specifications, see Appendix
A.
Trinix does not monitor the back-up power supplies. Operation of the
external-back-up power supplies must be checked by monitoring the
power supply status LEDs and Output voltage on the DC-Input connec-
tors. Check the voltage on the DC input connector only at installation to
verify proper connections. After that, you can verify operation with the
LEDs on the front panel of the power supply.