Grass Valley T2 Classic iDDR Quick Start - Manual (Page 16)

T2 ― Quick Start Guide ― 16
Recording a clip
➊ Click the R1 channel to activate.
➌ Click the Switch View (1ch
Disp) button to switch to the 1ch
Display to specify the detailed
information on the clip.
➋ Verify signal sources.
➎ Click the REC button to start recording; click
the STOP button to stop.
➏ Click the clip name box to
change the clip name.
➑ The recorded clip is
registered in the Bin.
➐ Click the Switch View (3ch
Disp) button to switch back
to the 3ch Display.
➍ Choose a Bin to store the
recorded clip.
Workstation mode