Grass Valley STORM 3G Elite - Manual (Page 68)

Section ― Setting Editing Environments
68 STORM 3G ELITE ― Setup Guide
VCR Constants
VCR ID
VCR Constant 1 byte1 and byte2 are
displayed.
For SONY decks, the deck ID (including
model/mode) is displayed.
Check for Deck ID
Click it to load VCR ID (deck ID) from the
connected deck.
VCR
Display the deck name corresponding to the
VCR ID (only ID and deck names which are
set as preset). If there are multiple decks with
the same ID, all the decks are displayed.
Edit Delay
VCR Constant 1 Byte 6 is displayed.
If the deck is not in the preset, enter manually.
E-E Delay
VCR Constant 1 Byte 5 is displayed.
If the deck is not in the preset, enter manually.
Start Delay
VCR Constant 2 Byte 2 (Data 10 depending on
the VCR) is displayed.
If the deck is not in the preset, enter manually.
Load Default Presets
Initialize the edit delay, E-E delay, and start
delay with the preset values.