Grass Valley STORM 3G Elite - Manual (Page 31)

STORM 3G ELITE ― Setup Guide 31
Connecting STORM 3G Elite
Connecting STORM 3G Elite
Mounting to desktop PC
Before board setting, be sure that your work area is
dust-free and dry. Prepare a Philips screwdriver and
an empty box for removed screws in advance.
Also, be sure that your PC is turned off and that the
cables (including power) are removed from the PC.
1
Tightly set STORM 3G Elite PCI Express Expansion
board in PCI Express slot (PCI Express x4).
POINT See the instruction manual for your PC
(motherboard) for the PCI Express slot
type.
When PCI Express x4 is not available,
either PCI Express x8 or x16 can be used.
The expansion board should fit in the
PCI Express slot without using any
force. If the board cannot be inserted
fully, please do not force in or bend any
parts of the board.
•
•
•