Grass Valley PDR 200 9 GB Disk Drive Upgrade - Manual (Page 20)

9GB Disk Drive Upgrade
10 PDR 200 9GB Disk Drive Upgrade
Installing Disk Drives
To install the new disk drives:
1. Observe ESD cautions and shock warnings on page 6.
2. Being sure to observe the connector orientation, reinstall the disk drives
previously removed by sliding the drive caddie into the drive tray and firmly
pressing down to connect the drive connector to the SCSI Backplane
(Figure 3, page 6).
3. Being sure to observe the connector orientation, in turn, slide each new drive
into an unused caddie slot in the drive tray and firmly press down to connect
the drive connector to the SCSI Backplane (Figure 7).
Figure 7. Installing Disk Drive Caddies
9979-3
A3
A4
A5
A6
C3
Disk IDs
C4
C5
C6