Grass Valley Profile Fibre Channel Server Interface - Manual (Page 9)

Command Descriptions
Profile Fibre Channel Server Interface 9
Options
num_buffers — defaults to 16, which supports 8 streams
buffersize_in_kbytes — The size of each buffer in kbytes, defaults to 4096 (4
MBytes total).
See Also
pdr(1), mkset(1), pdrClean(1), pdrStream(1)
Note:
pdrSstream should only be run by user “profile”
profile_start –
Automatically starts the Profile Fibre Channel Server Interface when the
Origin server boots.
Synopsis
/etc/init.d/profile_start
Description
This command is to be used with a cold boot, and should be installed in /etc/init.d.
A symbolic link to it should be created in /etc/rc2.d Use a high number....e.g.:
cd /etc/rc2.d
ln -s ../init.d/profile_start S999profile
See Also
pdr(1), mkset(1), pdrClean(1), pdrStream(1)
Note:
profile_start should only be run by user “profile”\