Grass Valley NV8900 Series v.1.3 - Manual (Page 21)

13
Misc. Topics
Chapter 3 provides the following:
Topics
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Obtaining Software and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Channel Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Audio Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Package Contents
If you have ordered one or more NV8900 products from Miranda, inspect the shipping container
for damage. If you find any container damage, unpack and inspect the contents. If the contents
are damaged, notify the carrier immediately.
As you unpack the shipping container, look for the packing slip and compare it against the
contents to verify that you received everything as ordered. If anything is missing (or if you find
equipment damage unrelated to shipping), please contact technical support. Refer to
Grass
Valley Technical Support on page 35 .
Depending on your order, the NV8900 items that can ship include:
• One or more NV8900 devices.
• One or more power supplies (PS0001) with power cord retention straps.
The package does not contain network cables, serial cables, or mounting screws.
You do not need to take any special precautions regarding ESD.
This document does not address the shipment or installation of any other equipment or soft-
ware that can be used in conjunction with the NV8900 (including the NV9000 system controller,
NV915 system controller, and configuration programs such as MRC or NV9000-SE Utilities).
This document does briefly address the use of MRC as it pertain to setting the interfaces’ IP
addresses.
Installation
The NV8900 interface(s) are designed to mount in a standard 19
″ equipment rack. This is not a
requirement, but we assume a 19
″ rack for the sake of simplicity.
Follow these steps to install an NV8900 interface:
1 Set the position of the 16-position rotary switch on the front of the interface.
Set the switch to any non-zero position.