Electrolux CSIG 503 W - Manual (Page 15)

15
Cleaning around the flame spreader
☞
- Remove the small flap.
- Slide forward the remainder of the lid.
- Lift from the back.
When cleaning around the flame spreader, particles
can fall into the drawer below. We recommend
placing some paper over the contents of the drawer
whilst cleaning.
Please ensure the paper is removed after cleaning or it
may ignite, when the oven is next used.
We advise using a stiff dry brush to remove stubborn
grease deposits around the base of the unit (see Fig.).
Remove any remaining surface fat with a sponge
while the oven is still warm.
Place a brush or other suitable cleaning implement
into the aperture and brush around the base of the unit
with a suitable detergent.
UNDER NO CIRCUMSTANCES
SHOULD THE FLAME SPREADER
BE REMOVED.
After cleaning, replace the lid correctly.
FO 0176
FO 0177
Oven Shelves
To clean the oven shelves, soak in warm soapy water
and remove stubborn marks with a well wetted soap
impregnated pad. Rinse well and dry with a soft
cloth.
FO 0424
Oven lamp replacement
Disconnect the appliance.
Unscrew the lamp and substitute it with another
suitable for higher temperature (300
°
C) having the
following specifications:
Voltage: 230-240V (50Hz)
Power: 15W
Connection: E14
Lid cleaning
The cooker lid can be disassembled, to allow a better
cleaning(see fig.). After a proper cleaning, carefully
reposition the lid into its hinges.
FO 0418