Envision Peripherals G2016WA2 - Manual (Page 12)

Engl
ish
Deutsch
Fr
ançais
Care and Maintenance
Care
z Avoid exposing your monitor directly to sunlight or other heat source.
Place your monitor away from the sun to reduce glare.
z Put your monitor in a well ventilated area.
z Do not place any heavy things on top of your monitor.
z Make certain your monitor is installed in a clean and moisture-free area.
z Keep your monitor away from magnets,motors,transformers,speakers,
and TV sets.
Note
z
Move the LCD out of the package and take off the plastic bag
and polystyrene Foam.
z Pull the base from Parallel versus Panel to Vertical.
z Adjust the Panel within 0 degree leaning forward and 20 degree
leaning backward.You must bend harder to exceed 20 degree
backward but this range is for packing the unit to a small size for
storage only.
Safety Tips
z
If smoke,abnormal noise or odor came out from your monitor,
caution you should remove the power cord immediately and call
your service center.
z Never remove the rear cover of your monitor cabinet.The display
unit inside contains high-voltage parts and may cause electric
shock to human bodies.
z Never try to repair your monitor yourself.Always call your service
center or a qualified technician to fix it.
Troubleshooting
No power
z Make sure A/C power cord is securely connected to the power adapter
and the power supply is firmly connected to the monitor.
z Plug another electrical device into the power outlet to verify that the
outlet is supplying proper voltage.
z Make sure all signal cables are installed.
Power on but no screen image
z Make sure the video cable supplied with the monitor is tightly secured to
the video output prot on back of the computer.If not,tightly secure it.
z Adjust brightness.
Worng or abnormal colors
z If any colors(red,green,blue)are missing,check the video cable to make
sure it is securely connected.Loose or broken pins in the cable connector
could cause an improper connection.
z Connect the monitor to another computer.
9