Grass Valley KMV-3901 Apr 13 2015 User Manual
Page 6
4
Configuring a KMV-3901/3911 Cascade
Adding Multiviewers to a Cascade
To add multiviewers to a cascade:
1 Open XEdit, and then click Connect on the Configure menu, to access the multiviewer
that will output directly to the monitor wall (i.e. the multiviewer whose HDMI outputs
are connected to the display monitors).
You can now add the other multiviewers you wish to be part of this cascade (one or two
KMV-3901/3911) to a cluster.
2 In the equipment library, select any multiviewer type, and then drag it onto the root of
the System hierarchical list.
The Add Multiviewer to Cluster window appears.
3 If your PC and the multiviewer you wish to add are on the same subnet, then you can
select the multiviewer’s IP address from the list. Otherwise type the appropriate IP
address in the box.
The multiviewer is added to the System list.
4 Repeat from
if this cascade system includes a third multiviewer.
Note:
The system type is automatically adjusted based on the actual target
system.