Grass Valley Kaleido-IP with Kaleido-X16 Cascade Manual User Manual

Page 4

Text mode
Original mode

Physical Installation

To interconnect a Kaleido-IP and a Kaleido-X16 into a cascade

1 Connect one of the Kaleido-IP’s DisplayPort outputs to a DVI input on the Kaleido-X16.

2 In the case of a cascade room with two output heads, connect the second DisplayPort

output on the Kaleido-IP to the second DVI input on the Kaleido-X16.

3 Connect the appropriate HDMI outputs on the Kaleido-X16 to one or two monitor wall

displays, depending on the multiviewer model (dual or single) and on your specific
purposes.

Note:

Although nothing prevents you from connecting any DisplayPort

output to any DVI input, the recommended practice is to choose the most
logical signal path, by connecting DP1 to DVI IN 1, and DP2 to DVI IN 2.
Configuring your cascade system in XEdit will then be straightforward.