Grass Valley K2 Summit Client Upgrade Instructions Nov.23 2009 - Manual (Page 5)

13 October 2009 K2 Summit Production Client & K2 Solo Media Server Field Kit Upgrade Instructions 5
Installing a two channel upgrade
8. Install the upgrade codec module as illustrated.
9. Start up the K2 Summit Production Client.
On restart, the K2 Summit Production Client rescans hardware and automatically
discovers the new codec module.
10. If a message appears, follow the instructions in the message to either restart or
shutdown/startup. This second startup process is necessary so that the K2 Summit
Production Client can reconfigure appropriately.
11. After installing the replacement codec module, install the current version of K2
software and restart. An over-install is all that is required. You do not need to first
un-install the software. This ensures that the board is flashed with the proper
version to be compatible with K2 software.
12. Log in to Windows and AppCenter, and open Configuration Manager. The new
channels are available for configuration.
13. Configure channels as follows:
• If you are installing K2-XDP-2SDIO-FK, your new channels are SD-only.
Loosen thumbs 1
Slide in 1
Tighten thumbscrews 2