Grass Valley K2 Storage v.9.0 - Manual (Page 21)

Cable K2 Media Server
As directed by the system diagram for your K2 SAN, cable the K2 Media Server or Servers for your
K2 SAN using the instructions in this section.
Related Topics
K2-SVR basic on page 21
K2-SVR redundant on page 22
Securing a server to a rack
If the server is a Dell server, follow the instructions provided in the shipping box to install the rack
rails and position the server in the rack. For the Dell 1RU PowerEdge Server, follow the illustration
below to secure the system to the rack.
Install a screw in the bottom hole of the bracket on each side. Do not attempt to install a screw in
the top hole of the bracket.
K2-SVR basic
These cabling instructions apply to the following:
• Dell R610 PowerEdge Server on a basic (non-redundant) online or production K2 SAN.
17 October 2012 K2 Storage Cabling Guide 21
Cable K2 devices