Grass Valley K2 Dyno Quick Start v.2.0 - Manual (Page 29)

16 May 2011 K2 Dyno Replay System Quick Start Guide 29
Chapter 2 Operation
Tips and shortcuts
• To assign a rating (stars) to a highlight clip, use keyboard shortcut F1 .
• The Shift button toggles between the top and bottom functions, as labeled on the
controller’s buttons. The Shift button also affects the function of controls displayed
on the touch screen.
• From Config | Panel, you can adjust controller panel attributes such as LCD and
button brightness. You can adjust the speed, range, and other parameters of the jog
knob and the T-bar.
• To play an angle from the beginning of the clip, press FN and then press A or B or C .
• Swap channels between PI and P2 playout channels by pressing Fn and then Take .
• To cue up a highlight, double-tap on the highlight.
• All Angle Playlist — select highlight clip, press Fn then Add PL .
• Change angles in the playlist — Fn and Angle button
• Slot box selection:
• To select a bin, enter its number. Example: typing 1 selects bin 1.
• To select a particular slot inside a bin, type the bin number and the slot number.
Example: typing 1.2 cues up the second slot in bin 1.
• To select a particular angle, type the bin, slot, and angle number. Example,
typing 1.2.3 selects the third angle of the second slot in bin 1
• To add a pause to a single event in a playlist, press Fn and the corresponding M/E
symbol to the right of the event.