Grass Valley K2 Dyno 6X SSM - Manual (Page 2)

Belden, Belden Sending All The Right Signals and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affiliated
companies in the United States and other jurisdictions. Grass Valley, K2 Dyno and K2 Summit are trademarks or registered trademarks of
Grass Valley. Belden Inc., Grass Valley and other parties may also have trademark rights in other terms used herein.
Copyright © 2014 Grass Valley. All rights reserved. Specifications subject to change without notice.
GVB-1-0326A-EN-QG
WWW.GRASSVALLEY.COM
Join the Conversation at
GrassValleyLive on Facebook, Twitter,
YouTube and Grass Valley - A Belden Brand on LinkedIn.
QUICKSTART K2 DYNO 6X SSM
Shutting K2 Dyno Down
Press the Shift button and then from the HOME screen or the CONFIG screen, tap the EXIT SoftKey.
This is the first step in shutting down the K2 Dyno S Replay Controller in three different modes.
The Confirm Exit panel opens. The default shutdown mode is the Startup screen.
To exit to Shutdown, do the following:
a) Open the Confirm Exit panel, as instructed by the steps earlier in this procedure.
b) Tap the SoftKey next to the Shutdown mode prompt until it displays Shutdown. When Shutdown
is selected, the SoftKey to the left of the blue box changes to Shutdown.
c) Tap Shutdown to continue to exit. The K2 Dyno S Replay Controller powers off.
Shutting Down AppCenter in K2 Summit
To shut down AppCenter, do one of the following:
• Click the standard Windows X button in the title bar.
• Select System | Shutdown. The Shutdown dialog box opens.
When you shut down AppCenter, select the following: Exit to Windows
A second dialog box displays asking you to confirm that you want to exit.
After closing AppCenter, click on the start bar in windows, then select Shutdown. This will shut
down the computer
Common Function (Fn) Button Uses:
Fn+In = clear In
Fn+Out = clear Out
Freely move T-Bar without influencing playback – Hold down Fn button,
move T-Bar.
Multi-select – select one clip, hold Fn Button, select other clips.
FOR ADDITIONAL INFORMATION refer to the QUICK START GUIDE included with the K2 Dyno
Controller, or visit:
www.grassvalley.com/products/k2_dyno and select Documentation from the Resources section.
Shutdown Procedure for K2 Dyno/K2 Summit