Grass Valley iControl XML - Manual (Page 14)

iControl XML Gateway for Control of Miranda Modular Interface Functional Highlights
Miranda Technologies – Confidential Page 14 of 28
As illustrated above in Figure 5.2, the listNode command results in the XML Gateway providing a list of
all devices registered as services in the iControl Directory Service. Among the devices listed is the DEC-
1001 card, with the following criteria:
Parameter
XML Label Value
Card
Identification ID m3.icontrol.com_m2_3_Densite_SLOT_10
Card Name name DEC1001
Card Group group Proc_Amps
Frame Name frame m2_3
Frame Slot
Number slot 10
Application
Server IP address
and socket port address 10.10.30.10 13000
Device Type type DEC1001_46
Jini Lease
Experation expiration 300
Device Overall
Status globalStatus OK
A comparison between Figures 5.2 above and Figure 5.3 below clearly illustrated that some of the same
information provided by iControl Navigator can be extracted with the listNode command.
Figure 5.3: iControl Navigator display of detected Densite modules and other services