Grass Valley K2 Edge User Manual v.4.0 - Manual (Page 11)

K2 Edge User Manual - document version: 4.0 – Page 11
• Audio channels: specify audio groups per port
• SDIO1-9:
 Single audio group
 Two audio groups
 Three audio groups
 Four audio groups
• SDI port misc
• SDIO1
 VBI: Enabled/Disabled
 HBI: Enabled/Disabled
• SDIO2-8
 Key/Fill
• Enable recording channel: On/Off
8.4.3 Time settings
Set the system date and time.
• Current date: yyyy-mm-dd
• Current time: hh:mm
8.4.4 Licenses
Licenses are preconfigured.
Click Set to save changes, and then Activate to activate changes.
8.5
System monitoring
• SNMP monitoring: not implemented yet
• System info:
• RAID 1-4: partition free space (K)
• Memory installed (MB)
• CPU usage (percentage)
• Non-running programs
• Serial number and system installer version
• PSU1-2 status
• GPU Temperature (Celsius)
• HD1-2 raid status
• HD1-2 SMART status
• HD1-2 temperature (Celsius)
• Fans (speed in rotations per minute)
• UDP Monitoring: use this option to monitor Channel 0 (the single HD or SD Channel, or the HD
Channel in a simulcast setup) via IP. When enabled, a MPEG- transport stream with encoded
video, graphics, subtitles and audio (first stereo track) is sent over Ethernet using the UDP-
protocol. A video player such as VLC is installed on a workstation to view output.
The UDP-monitoring option is described in more detail in the K2 Edge User Manual.