Grass Valley K2 Edge Smart Playout Center v.4.0.2 - Manual (Page 5)

K2 Edge Smart Playout Center Join In Progress User Manual - document version: 4.0.2 – Page 5
4.2 Defining a JIP Channel in Cobalt
To create a JIP Channel definition in Cobalt:
 Double-click the Cobalt icon to open Cobalt.
 Click the Asset Manager icon to open Asset Manager.
 In Cobalt Asset Manager, go to a Channel-tab and click the new icon.
Are you sure to add a new asset? > Ok.
 Specify the following settings:
o channel name : a name for the Channel, for example ‘JIP-Main’.
o server ip (playout): the IP-address of the K2 Edge playout node (main or backup)
this Channel will run on.
o broadcast set: select 5:broadcast-4
Channel Broadcast set
Single HD/SD 0
Simulcast 1 of 2 (HD) 0
Simulcast 2 of 2 (SD) 0
Preview 1
Record 3
JIP 4
o server port: server port, default 5020
o Select the correct broadcast format .
o opt out: opt out channel: not used
o join in progress: select the Channel to JIP with; this should be the primary Channel
(broadcast set 0).
 Click Save to save changes, Cancel to discard.
Other settings can be left at the default.