Grass Valley K2 Edge Smart Playout Center v.4.0.2 - Manual (Page 4)

K2 Edge Smart Playout Center Join In Progress User Manual - document version: 4.0.2 – Page 4
4 Setting up JIP
Setting up JIP consists of the following steps:
• Activate JIP via the IP Manager.
• Define a JIP Channel in Cobalt.
• Define JIP-templates plus the jipOff template in Channel Composer.
• Optional: create Format Rules to replace normal formats with JIP-formats for the JIP Channel.
4.1 Activating the JIP Channel via the IP Manager
 Open the IP Manager web interface; enter the IP Manager's IP-address in a web browser and
log in.
 Go to Channel Configuration > Enable JIP channel > select On.
 Click Set > Activate. Note that activating changes will interrupt playout.
Example JIP enabled in IP Manager.