Grass Valley FOL-1601 - Manual (Page 12)

GUIDE TO INSTALLATION AND OPERATION
8 | FOL-1601
4 Specifications
Optical Input
Connector SC/APC
Fiber Type Single Mode 9/125µm step index [SI] fiber complying with ITU-T
recommendation G.652, TIA/EIA-492CAAA, IEC Publication 60793-
2 and GR-20-CORE requirements.
Maximum attenuation of 0.4dB/km @ 1310nm
Wavelength 1270-1610nm
Fiber Length Up to 20km
Input Power Range -14 to 0dBm NOTE: The output power of the companion
FLO-1601 transmitter is +3dBm, so for
short-haul circuits with little attenuation
it may be necessary to use an optical
attenuator at the FOL-1601 input to
reduce the incoming power to within the
specification.
RF Outputs
Manual Gain Control Range 31dB (nominal)
Output Frequency Range 950 to 2150MHz
Output Power Range -41dBm to -0dBm
Gain Flatness ±1.5dB @ 950 to 2150MHz
Output Impedance 75 Ω
Return Loss >10dB across frequency range 950 – 2150MHz.
Connector Type-F
Electrical Specification
Power Consumption 5W