Grass Valley ADVC G4 - Manual (Page 17)

5
4 Hardware Settings
4.1 DIP switches
SW1 Specifies the reference signal source.
OFF: External(Ref. in)
ON: Internal
SW2 Specifies the HD resolution.
OFF: 1080
ON: 720
SW3 Specifies the test pattern
OFF: Black Burst
ON: Test Pattern
* Takes effect only for SD output.
* Also used to switch DARS between Silent/Tone.
SW4 Specifies the NTSC pedestal.
OFF: 0IRE
ON: 7.5IRE
* Takes effect only for NTSC output.
SW5 Reserved
SW6 Specifies the output signal for Line A.
OFF: SD
ON: HD
SW7 Specifies the output signal for Line B.
OFF: SD
ON: HD
SW8 Specifies the output signal for Line C.
OFF: SD
ON: HD