Grass Valley ADC-1101 - Manual (Page 5)

GUIDE TO INSTALLATION AND OPERATION
ADC-1101 | 1
1 ADC-1101 Component-to-SDI Converter
1.1 Introduction
The ADC-1101 is a broadcast quality component analog video to serial digital converter and is ideal for
converting high-quality component analog sources to the digital domain. It provides input auto-calibration
which can accommodate non-standard video or correct a calibration defect in the incoming video signal.
The ADC-1101 can also work in conjunction with up to two Miranda audio cards (such as Densité UAP-1781)
to embed up to 8 audio channels in the serial digital output.
Finally, the ADC-11011 offers video thumbnail streaming and audio level meters for optimized real-time
monitoring, using iControl.
1.2 Features
• SD
compatible
• High-quality 12-bit quantization
• Y/Pb/Pr input, GBR support
• SMPTE/EBU, Betacam levels support
• Input auto-calibration to accommodate non-standard video inputs
• Sync on green
• Embeds up to 8 audio channels using a Miranda audio card (such as UAP-1781)
• Ancillary data blank or pass, line by line
• Real-time monitoring via video thumbnails and audio level meters
• Built-in
test signal
• Optional line scope for signal analysis via iControl
1.3 Block Diagram