Grass Valley ADA-1033 User Manual
Serie densite, Ada-1033 introduction, Features
SERIE DENSITE
ADA-1033 Single/ Dual Analogue Audio Distribution with remote gain
Guide to Installation and Operation
M479-9600-100
July 2004
ADA-1033
Introduction
L’ADA-1033 is an analogue audio distribution amplifier that
can be configured for monaural or stereo applications. In
single mode, it distributes one input to eight outputs and in
dual mode each channel has four outputs.
Each channel gain is trim controlled from the frame controller
or from an external remote potentiometer. All modules of the
DENSITE Series include a push button on the card front
edge, which permits to assign the front panel controller to
consultation and adjustments. A multi-coloured Led, visible
with the door closed, reports the card status
The ADA-1033 requires a 'single' or a ‘double' rear connector
panel.
Features
•
Balanced input and outputs
• Distribution amplifier 1 input / 8 outputs or 2 x 1 input / 4
outputs
• Remote control of gain by external potentiometer or from
front panel controller
•
Intra frame output for monitoring
•
Status LED and remote reporting
•
Alarm configuration: absence signal, overload
•
Easy to install audio connectors
AUDIO
OUTPUTS
AUDIO
INPUTS
Microcontroller
1
2
3
4
5
6
7
8
1
2
Rem Control
Select
Status
ADA-1033 Functional Block Diagram
Remote
Gain
Control
Volume CTRL
Amp
Amp
To MONITOR
Specifications
Input
Balanced
Signal: ...................... analogue audio
Impedance: .............. > 20 k
Ω
Common mode
rejection: .................. > 50 dB
Outputs
Balanced
Signal : .................... balanced analogue audio
Impedance: .............. < 50
Ω
Processing performance:
Gain: .........................-96 to +31.5 dB (0.5 dB step)
Max. Level:................+25 dBu
SNR: .........................< -90 dBu
..................................20 Hz to 20 kHz unweighted
Distortion: .................< -85 dB (20 Hz to 20 kHz) @ +23 dBu
Cross talk : ...............<-100 dB (20 kHz)
Freq. response: ........±0.2 dB (20 Hz to 20 kHz)
Miscellaneous
Power: .......................single 4 W
..................................double 7.5 W
Specifications are subject to change without notice.