LeEco Super4 X Series 4K UHD Ecotvs - Manual (Page 16)

16
Antenna Setup
Set up an antenna to access broadcast channels.
• Plug a coaxial cable into the ANT IN connector.
• Navigate to Inputs from the home screen, and select
Cable/Antenna. NOTE: If you have not programmed
your TV to scan for channels using the antenna,
then select Tuner from Channel Sources.
• Once in Tuner mode, select Air option.
• Follow the prompts to scan until broadcast chan-
nels display on screen.
• Connect to antenna by plugging coaxial cable into
the ANT IN connector.
Channel programming guide and other features:
• To access the channel programming guide, press the
Menu key on your remote, and select Program Guide.
• Use additional menu options to access other features,
including Closed Captioning, Input Sources, Display
Modes, Multi-Audio, Video Description, Channel
Setup and Parental Controls.