Eton SOUND 110 - Manual (Page 5)

3
Plug the AC adapter into the mains and then into the radio’s AC
14VAC socket.
The remote uses a CR/DL2025 battery. Insert it into the battery
holder with the writing facing opposite to the writing on the remote.
Replace the battery when it no longer works. Pull out the plastic tab
to activate the remote.
Press the STANDBY button on the radio or on the remote.
Press the MODE button on the radio or the remote to select UDISK,
SD/MMC, AUX or TUNER.
Use the VOL buttons on the remote or the volume knob on the
unit.
Use the MODE button to select TUNER, then select AM/FM with the
remote’s AM/FM button or the BAND button or the BAND button
on the unit. Tune using the tuning buttons on the radio or the
remote. A quick, short press tunes individual frequencies; a longer
press of 1 second engages auto tuning, which tunes only to stations
of strong signal strength.
PREPARING THE REMOTE FOR USE
SOUND 110 OWNER’S MANUAL SOUND 110 OWNER’S MANUAL
TURNING THE RADIO ON
SELECTING PLAY MODES
ADJUSTING VOLUME
PLAYING AM OR FM
SETTING UP YOUR SYSTEM continued