EMU Australia E-MU LONGboard 61 - Manual (Page 30)

30 LONGboard 61 SHORTboard 49
APPENDIX
Troubleshooting
Problem:
Sustain pedal operation is reversed (the notes sustain when the pedal
isn’t pressed and stop sustaining when the pedal is pressed).
Solution:
The sustain pedal polarity is sensed on power-up. Don’t press the
sustain pedal during power-up or the sustain pedal operation may be
reversed.
Problem:
Interference from computer networking gear when using the PIPEline
receiver.
Solution:
Try using a different channel on the keyboard and PIPEline.
Problem:
Noticeable delay in the sound when playing a software virtual instru-
ment or when recording the keyboard’s audio output.
Solution:
This delay is known as latency and can be adjusted by changing the
buffer size setting in your recording application. Try to set the buffer
size as low as possible without hearing clicks or pops in the audio
stream. Faster computers generally allow smaller buffer size settings and
lower latency.