Safety instructions – Earthquake Sound MiniMe P10 User Manual
Page 2
Safety Instructions
13. Damage Requiring Service — The Component
1. Read Instructions — All the safety and operation
should be served only by EQ qualified serviced
instructions should be read before the Earthquake
personnel when:
Component is operated.
a. The power-supply cord or the plug has been
2. Retain Instructions — The safety and operating
damaged; or
instructions should be kept for future reference.
b. Objects have fallen, or liquid has spilled into the
3. Heed Warnings — All warnings on the
Component; or
Components in these operating instructions should be
followed.
c. The Component has been exposed to rain; or
4. Follow Instructions — All operating and other
d. The Component does not appear to operate
instructions should be followed.
normally or exhibits a marked change in performance;
or
5. Water and Moisture — The Component should not
be used near water - for example, near a bathtub,
e. The Component has been dropped, or its cabinet
washbowl, kitchen sink , laundry tub, in a wet
damaged.
basement, or near a swimming pool, etc.
14. Servicing — The user should not attempt to
6. Ventilation — The Component should be situated
service the Component beyond those means
so that its location or position does not interfere with
described in this operating manual. All other servicing
its proper ventilation. For example, the Component
should be referred to qualified Earthquake service
should not be situated on a bed, sofa, rug, or similar
personnel.
surface that may block any ventilation openings; or
placed in a built-in installation such as a bookcase or
15. To Prevent Electric Shock — Do not use this
cabinet that may impede the flow of air through
polarized plug with an extension cord, receptacles of
ventilation openings.
other outlet unless the blades can be fully inserted to
prevent blade exposure.
7. Heat — The Component should be situated away
from heat sources such as radiator, or other devices
16. Grounding or Polarization — Precautions should
which produce heat.
be taken so that the grounding or polarization means
of the Component is not defeated.
8. Power Sources — The Component should be
connected to a power supply only of the type
This apparatus does not exceed the Class A/Class B
described in these operation instructions or as marked
(which ever is applicable) limits for radio noise
on the Component.
emissions from digital apparatus as set out in the
radio interference regulations of the Canadian
9. Power Cord Protection — Power-supply cords
Department of Communications.
should be routed so that they are not likely to be
walked upon or pinched by items placed upon or
against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where
they exit the Component.
10. Cleaning — The Components should be cleaned
only as recommended in this manual.
11. Non-use Periods — The power cord of the
Component should be unplugged from the outlet when
unused for a long period of time.
12. Object and Liquid Entry — Care should be taken
so that objects do not fall into and liquids are not
spilled inside of the Component.
The exclamation point within an
equilateral triangle is intended
to alert the user of the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
The lightening flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure,
that may be of sufficient
magnitude to constitute a risk of
electric shock to a person.
Earthquake • MiniMe User Manual
2