Emerson Radio MS3100 - Manual (Page 8)

7
Setting the clock
Setting the clock
1.
Press to switch the unit on.
2.
Press the AUX button. (Note the time setting appears at the centre of
the display.)
3.
Press
MEMORY so that the hour setting flashes, then immediately
press + or - to set the correct hour.
4.
Press
MEMORY
repeatedly so that the minute setting flashes, then
immediately press + or - to set the correct minute.
After the display has stopped flashing, the clock is set.
Note
–If ever you find the whole time display is flashing, this means that the
clock needs to be reset (possibly due to the unit having been disconnected
from the AC outlet, or a power interruption).
Note
– check the AM / PM indicator (to the left of the hour) to ensure you
make the correct setting.