Envision Peripherals Envision Professional G918w1 User Manual

Page 10

Sharpness :

To adjust the clarity of a non-WXGA (1440x900) signal with

W or V button.

Setup Menu :

To set up Language Select, Resolution Notice, OSD Position,

OSD Time Out, and Input Select (Analog).

Language Select :

To allow users to choose from available languages.

Resolution Notice :

Resolution Notice is to remind you set the best quality

for the image.

Choose “Enable” : Every 30 seconds, it will show a window “ For best

picture quality change resolution to 1440 x 900” to remind you set the
best quality for the image.

Choose “Disable” : It will not show a window to remind you set the best

quality for the image if the resolution is lower than 1440 x 900.

OSD Position :

Press 2 button to select between horizontal and vertical

OSD Position adjustment.
Horizontal OSD Position : To horizontally adjust the OSD position.
V

: move OSD to the right, W : move OSD to the left.

Vertical OSD Position : To vertically adjust the OSD position.
V

: move OSD up, W : move OSD down.

OSD Time Out :

To automatically turn off On Screen Display(OSD)after a

preset period of time.

Input Select :

When press Input Select change Input signal to Analog or

Digital.

Memory Recall :

To recall factory settings for Video & Audio controls.

Press button 2 to select the Memory Recall menu option.

Fine Tune :

To adjust the delay time of data and clock.

Press W or V to adjust to your preference.