Eneo WFL-II/LED15-12 - Manual (Page 8)

3. Power supply units
Type EDP-No. Input voltage range Output voltage under For IR-LED Integrated
load and connected spotlights Twilight switch
sense line
NE-120 73865 100-240 VAC
±
10% 13.5 VDC; ambient 30/60 W Yes
temp. +20
°
C
NE-109N 73827 100-240 VAC
±
10% 12 VDC
±
0.5 VDC 15 W No
2. Types and Specifications
Type WFL-II/LED-15W MFL-I/LED-30WN WFL-I/L
EDP-No. 73826 73805 73806
Wattage at nominal voltage 15 W 30
Current consumption 1.25 A 2
Operating voltage (
±
0,5 V) 12 VDC
Infrared wave-length max. emission 950 nm 880 nm 880 nm
Approx. range * (nominal range) 10-15 m 35 m 28 m
Reduced light emission to 75% after:
Heating above ambient air temperature max. 35
°
C max
Protection grade
Weight ** 350 g
Dimensions L x W x H 66 x 66 x 55 mm
Connector thread 1/4"
* On condition that a camera is used with max. sensitivity in the infra-red range,
a rel. lens aperture: min. 1.4 and a mean reflectance factor for spotlight objects.
** Without power supply unit