Eneo WFL-II/LED15-12 - Manual (Page 11)

Twilight switch
It is recommended that mains units
be operated with a twilight switch*.
Daylight-related on/off switching
prevents the IR-spotlight from
possibly overheating e.g. through
intensive sunlight.
* As a standard feature in the
NE-120 included.
Accessories for 30 and 60 W
Infrared-LED-spotlights
Type Description EDP-No.
VPT/IRB-4L Mounting bracket for 77488
1 x IR-LED-spotlights
(P/T head series
VPT-40/41/42)
VPT/IRB-4T Mounting bracket for 77489
2 x IR-LED-spotlights
(P/T head series
VPT-40/41/42)
DS-3 Twilight switch with 73433
ON/OFF delay
4.2. IR-LED-spotlight 15 W
If necessary, shorten the spotlights
connection cable to required length
and connect.
black-white = (+) live VDC
black = (-) 0 V
Open the 2-pole jack plug (3.5 mm)
and solder the black-white cable (+)
to the shorter solder terminal and the
black cable (-) to the longer solder
terminal. Screw jack plug together
and plug into the power supply unit
NE-109N.
Important
The spotlight can also be operated
using suitable power supply units
from other manufacturers, however
they must have a stabilized output
voltage of 12 VDC (
±
0.5 VDC).
Accessories for 15 W Infrared-LED-
spotlights
Type Description EDP-No.
VPT/IRB-4L Mounting bracket for 77488
1 x IR-LED-spotlights
(P/T head series
VPT-40/41/42)
DS-3 Twilight switch with 73433
ON/OFF delay