Eneo F03Z06NDDC-MP - Manual (Page 3)

Installation Instructions
Common technical data
C/CS Mount Lenses, DC and DC/NFS Series
I Mechanical Construction.
Technical Specifications II Setup of the Image Sector
Open locking screw (T <–> W) and turn the ring
to adjust the zoom setting. Open locking screw
(∞ <–> N) and turn the ring to adjust the focus
setting.
Note: For a precise adjustment of cameras
installed outside it is recommended to place a
ND (Neutral Density) filter in front of the lens
while settings are done. This opens up the
iris and allows a setting which is constant at
changing light conditions due to the narrower
depth of field.
For camera format 1/2” and/or 1/3”
Aperture Max. aperture to
F360
*
Mount C/CS Mount
Current consumption max. 50mA
Iris response time approx. 2 sec.
Temperature range -20°C ~ +50°C
Automatical iris
closing yes
* The exact min. aperture for each lens can be
seen in our related product brochure om our
homepage:
www.eneo-security.com
www.videor.com
The lenses contain a galvanometer drive.
The galvanometer is driven directly (variable DC
voltage control) in the lens.
The required control PCB has to be integrated in
the camera if DC control types are used.
Once the lens has been screwed into the ca-
mera, the slip clutch mechanism on the C or CS
mount connection allows radial turning of up to
360°, for example to locate the cable connection
at the desired point.