Eneo VMC-10.4LED-CM - Manual (Page 19)

19
DE
EN
FR
PL
RU
1) BRIGHTNESS Adjust the brightness of DSUB ANALOG without affecting
AV’s brightness.
2) CONTRAST Adjust the contrast of DSUB ANALOG without aff ecting
AV’s contrast.
3) H POSITION Adjust the horizontal position of the image.
4) V POSITION Adjust the vertical position of the image.
5) PHASE Remove the noises. When phase value is wrong, the
image has vertical lines especially in 1 dot on and off.
6) PIXEL FREQ. Adjust the sampling frequency of DSUB analog signal.
COLOR
The tone of color can be changed from red-dish white to bluish white.
The individual color components are also user customizable.
* With VOL ▸, go to SUB MENU. After adjusting in SUB MENU, press MENU
to exit.
The color temperature could be changed based on the LCD
specification.
1) 9300K Change color temperature : Red 42 Green 52 Blue 50
2) 7300K Change color temperature : Red 51 Green 46 Blue 46
3) 6500K Change color temperature : Red 40 Green 54 Blue 54
4) USER User customizable. (RED, GREEN, BLUE)
PICTURE
COLOR
SETUP 9300K 7300K 6500K USER
RED
GREEN
BLUE - +
- +
- + 50
50
50