Electrolux 54750 - Manual (Page 14)

Operating instructions
14
b) Setting electronically
(The dishwasher must be switched off)
NOTE: the electronic setting of the water softener is possible ONLY
with the 3 in 1 function deactivated.
The dishwasher is factory set at level 5.
1. Press the On/Off button. The indicator lights of the programme
selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated this means that a washing programme is set.
The programme must be cancelled: press simultaneously
function buttons 2 and 3 for about 2 seconds, the indicator
light of the set programme button starts flashing. After about 2
seconds the indicator lights of all the programme selection
buttons will illuminate, this means that the set washing
programme has been cancelled and the machine is now in setting
mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of function buttons 1, 2, 3 and 4 start flashing.
3. Press function button 1, the indicator lights of function buttons 2,
3 and 4 turn off while the indicator light of the button 1 goes on
flashing, at the same time the indicator light end of programme
starts to flash.
The current level is indicated by the number of flashes of the
indicator light end of programme (see chart).
Example:
5 flashes = level 5.
4. To change the level, press function button 1. Each time the button
is pressed the level changes. (For the selection of the new level see
the chart).
Examples:
if the current level is 5, by pressing function button 1 once,
level 6 is selected.
if the current level is 10, by pressing function button 1 once,
level 1 is selected.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
152955 17/2en 13-10-2005 15:59 Pagina 14