Eneo EDC-3371 User Manual
Page 24
4
• HOME FUNCTION SETUP
HOME FUNCTION SETUP
HOME FUNCTION:
NONE
FUNCTION NUMBER:
– – –
WATING TIME:
0SEC
FUNCTION ENABLE:
OFF
SAVE AND EXIT (ESC TO CANCEL)
HOME FUNCTION
NONE / TOUR / PATTERN / AUTO SCAN / PRESET
FUNCTION NUMBER
– – –
WAITING TIME
0~40 seconds
FUNCTION ENABLE
ON / OFF
The HOME FUNCTION can be set so that the camera automatically goes to PRESET, TOUR, PATTERN, AUTO SCAN after the keyboard controller has been
idle for a amount of time. For example, if the controller
controller is idle for 0 seconds, the camera goes to preset .
Follow these steps to program the Home position:
. Select HOME FUNCTION by pushing the
Joystick to the right or to the left to scroll through the NONE, TOUR, PATTERN, AUTO SCAN or PRESET
functions.
. Select FUNCTION NUMBER and push the
Joystick to the right or to the left. The recorded function number will scroll.
3. Select WATING TIME and push the
Joystick to the right or to the left to select from 0 to 40 seconds.
4. Select FUNCTION ENABLE and turn to ON or OFF by pushing the
Joystick to the right or to the left.
• OSD DISPLAY
OSD DISPLAY SETUP
CAMERA TITLE:
DOMEID
VIEW DIRECTION:
OFF
DOME OSD:
ON
AREA TITLE:
OFF
PRESET TITLE:
CONSTANT
FOCUS EXPOSURE:
ON
OSD POSITION SETUP
SAVE AND EXIT (ESC TO CANCEL)
CAMERA TITLE
Up to 6 characters
VIEW DIRECTION
ON / OFF „ON” sets current direction as
N (North) and the coordinate angle to 000.
„OFF” hides the directional title. Every 90 degrees of clockwise rotation will change the title to
E (East), S (South),
W (West). If using the ON/OFF option frequently, it is recommended that you set „North” as a Preset. Recall the
„North” Preset before enabling the directional title.
DOME OSD
ON / OFF All display or title will disappear when DOME OSD DISPLAY sets OFF
AREA TITLE
ON / OFF If this option is enabled, the area title displays when the camera moves.
NOTE: The DOME OSD DISPLAY must be enabled.
PRESET TITLE
CONSTANT / OFF / 3, 30, 60,0,80 seconds
Set the preset title display time.
FOCUSE EXPOSURE
ON / OFF ON: FOCUS and EXPOSURE displays. (AF AE)
OSD POSITION SETUP Select the OSD option with Joystick up and down and press CTRL and adjust the position by Joystick.