Eneo EDC-4372 - Manual (Page 21)

21
DE
EN
FR
PL
RU
Setting Dome Camera Termination
The device which is connected at end of line, whether it be a dome camera
or keyboard controller, must have the cable for communication terminated
by setting the appropriate DIP switch. Without proper termination, there is
potential for control signal errors. Total length of the cable for communica-
tion should not exceed 1.2km.
SW1 SW1-1 SW1-2
Terminated ON ON
Not terminated OFF OFF
SW1: Termination switches
Fail-safe Network
Adress (ID-) and protocol
selection switches