Eneo EDC-4372 - Manual (Page 17)

17
DE
EN
FR
PL
RU
Notes on safety
Please also pay attention to the enclosed safety instructions, and carefully
read through this instruction guide before initial operation.
Important points of advice are marked with a caution symbol.
• 1x Fastrax IV (Dome Camera)
• 1x Bubble Ring (optional)
• 1x Instruction Manual (This Document)
• 3x Assembly Screws for Attaching Fastrax IV
• 3x Plastic Anchor
• 1x 10Pin Connector
• 1x 12Pin Connector
Installation
CAUTION: Be sure to have caution labels (E version only) on
both the body and the base of the camera. Different version will
not support input and output.
The dome camera is for use in surface mounting applications and the
mounting surface should be capable of supporting loads up to 4.5kg.
The dome camera’s base should be attached to a structural object, such as
hard wood, wall stud or ceiling rafter that supports the weight of the dome
camera.
Parts supplied