Eneo VKC-13140F2810IR - Manual (Page 29)

Operating Instructions
29
ULTRA CLEAR RESOLUTION CAMERA
7-4. COMMUNICATION
Sets the communication related function.
PROTOCOL(PELCO-D), BAUDRATE(9600), DATABIT(8), PARITY(OFF), STOPBIT(1)
are fixed. Can sets only ADDRESS number.
COMMUNICATION
PROTOCOL
ADDRESS
BAUDRATE
DATABIT
PARITY
STOPBIT
001
RETURN
PELCO-D
9600
8BIT
OFF
1BIT
Selects the lens type, AUTO or MANUAL. AUTO supports DC auto-iris lens only.
• TYPE (default: DC): This camera does NOT support video type auto iris lens.
MUST BE SET TO DC ONLY.
• MODE (default: AUTO):
Lens iris is automatically controlled according to the scene light level.
• ADJUST : Adjusts lens open control regardless of the light level.
• V : Flips the video signals vertically.
• H : Flips the video signals horizontally.
• HV : Flips the video signals horizontally and vertically.
• SPEED (default: 30):
Adjusts the iris control speed. The lower value is the faster speed.
If the speed is too slow or fast, the iris control may be unstable.
7-1-1. AUTO
7-2. FLIP : This function is used to inverse the pictures coming from the camera.
7-3. LCD/CRT (default: CRT):
7-1. LENS
Selects the correct type of viewing monitor will ensure the most optimal picture.