beautypg.com

Eneo HDB-2080MIR User Manual

Page 12

background image

11

6.2 MAIN menu

Press ● to enter the setup menu for about 1 second.

MENU V3.07

1. EXPOSURE

2. LENS

3. FOCUS ADJ.

4. SCENE ENHANCE

5. 3D-NR

6. DAY/NIGHT

7. PICT ADJUST

8. SPECIAL

9. SYSTEM

A. EXIT

DC

NORMAL

MID

AUTO


SAVE&EXIT

MAIN

Default

Descriptions

EXPOSURE

Sets EXPOSURE MODE, BRIGHTNESS, SENS-UP and AGC.

See ‘6.3 EXPOSURE’ for detail.

LENS

DC

Sets Lens type and See ‘6.4 LENS’ for detail.

FOCUS ADJ

See ‘6.5 ZOOM/FOCUS’ for detail.

SCENE

ENHANCE

NORMAL

NORMAL – Optimized for the normal indoor and outdoor in the good

lighting condition.

WDR – Improves the visibility for the high bright area and the dark area

by the double captures of image with LONG and SHORT exposures.

With WDR ON, the frame rate becomes half by the double captures.

WDR level can be selected from LOW, MID and HIGH.

Care should be taken to select this mode because video may lose its

quality in some environments by the over compensation.

CVBS video signal - Even if WDR is set to ON, it shows OFF on CVBS

video. It should be considered when installer adjusts the video with

installation monitor.

D-WDR – Improves the visibility by compensating the video gain for the

dark area. Noise can increase in the dark area accordingly.

BLC – Improves the visibility for the dark object by the bright back light.

Outside area of BLC window can over saturate.

BLC has a target window for compensation and its size and position

can be set by H-POS, V-POS, H-SIZE and V-SIZE.

HLC – Cuts out the highlight area with black mask and excludes it from

compensation. Lower HLC LEVEL cut out video from the lower level.