Eneo HDD-1012PTZ1080 - Manual (Page 16)

16
Installation
The dome camera is for use in surface or pendent mounting applications,
and the mounting member must be capable of supporting loads of up to
2.0 kg. (Pendent mounting must use pendent mount accessory.)
The dome camera’s mounting bracket should be attached to a structural
object, such as hard wood, wall stud or ceiling rafter that supports the
weight of the dome camera.
CAUTION: A silicone rubber sealant must be applied to seal the
housing to secure waterproofing.
Plastic anchors (4x)
Mounting bracket (1x)
Mounting screws (4x)
Safety lanyard (1x)
Dome camera (1x)