Eneo HDC-1004M1080 - Manual (Page 6)

5. OSD Function Description
5.1 Exposure
• BRIGHTNESS
Enable user to control the image brightness
(0~20 steps)
• SHUTTER MODE
Enable user to set up the Shutter Mode
> AUTO, MANUAL
• SHUTTER SPEED
Enable user to set up the Shutter Speed
< 1/30(25), 1/60(50), 1/120(100), 1/250, 1/700, 1/1K, 1/1.6K, 1/2.5K, 1/5K,
1/7K, 1/10K, 1/30K. ( ) is for power-frequency 50Hz
• DSS (Digital Slow shutter): Enable user to set up the DSS Level
> OFF, X2, X3, X4
• AGC MAX: Enable user to make imager bright to amplify the Gain (0~23dB)
•
INITIAL: Enable user to initialize the Exposure menu set up
5.2 WHITE BALANCE
Enable user to represent the accurate white
colour by controlling the R,G,B level.
• WB MODE
1. AUTO: Enable user to trace the White
Balance automatically in the range of
2,300K~110,000K
2. PUSH LOCK: Enable user to fix the White Balance according to the colour
temperature in the certain environment
3. MANUAL: Enable user to set the White Balance according to the circumstance.
•
CHROMA: Enable user to set the Color Gain (0~20 steps)
• KELVIN: In the MANUAL setting of WB MODE, enable user to set the colour
temperature range.
•
RED GAIN: In the MANUAL setting of WB MODE, enable user to set the RED GAIN.
• BLUE GAIN: In the MANUAL setting of WB MODE, enable user to set the BLUE GAIN.
• PUSH AUTO: In the PUSH LOCK setting of WB MODE, enable user to fix the
White Balance in camera setting.
• INITIAL: Enable user to reset the WHITE BALANCE menu setting
5.3 WDR/BLC
• MODE: Enable user to set WDR/BLC mode
> OFF, WDR, BLC
1. WDR (Wide Dynamic Range):
Use the condition which Image doesn’t
figure out with BLC such as place
surrounded windows and lobby.
(The screen display may be unnatural)
2. BLC (Backlight compensation mode):
This function works for subjects in the kind of backlight conditions.
•
WDR LEVEL: Enable user to set up WDR level (0~4 level)
• BLC OSD: Enable user to set up screen output of chosen BLC zone
• BLC X-POSITION: Enable user to set up Horizontal start position (0~20 steps)
• BLC Y-POSITION: Enable user to set up Vertical start position (0~20 steps)
• BLC X-SIZE: Enable user to set up Horizontal size (0~20 steps)
• BLC Y-SIZE: Enable user to set up Vertical size (0~20 steps)
• INITIAL: Enable user to initialize the WDR/BLC setting
5.4 DAY&NIGHT
Conversion of output image COLOR / BW
depending on exterior environment
• D&N MODE
1. COLOR: Enable user to fit the output
image in colour
2. B/W: Enable user to fit the output image in B/W
3. AUTO: Enable user to convert to COLOR/BW automatically by luminance
element on screen
•
DWELL TIME: In D&N MODE AUTO, enable user to set to delay time for changing
COLOR/BW (0~10 sec)
•
AGC THRS: The value of switching from Day to Night
In D&N MODE AUTO, enable user to set to AGC THRS level (0~20 steps)
•
MARGIN: To switch from Day to Night margins
In D&N MODE AUTO, enable user to set to MARGIN level (0~20 steps)
•
INITIAL: Enable user to initialize the setting in DAY&NIGHT menu
5.5 IMAGE
• SHARPNESS: Enable user to control the
image sharpness (0~10 steps)
•
MIRROR: Sets the horizontal flip for the
display output
• DZOOM (Digital Zoom): Max. 20x Digital Zoom
• HLMASK: This function that improves the visual recognition of license plates and
other such objects by suppressing or masking strong light sources.
1. HLMASK LEVEL: Enable user to set HLMASK Level (0~20 steps)
2. HLMASK COLOR: Set the HLMASK colour (Black, White, Yellow, Cyan, Green,
Magenta, Red, Blue)
•
D-WDR: In this mode, the brightness of a single image is compensated using the
gamma curve.
•
DNR: This function reduces noise.
OFF ON
OFF ON
• FLIP: Sets the Vertical flip for the display output
• INITIAL: Enable user to initialize the setting on IMAGE menu
Low resolution Noise removal effect
Low High