Eneo PXD-2030PTZ1080 - Manual (Page 4)

Alarm I/O Connector _____
When cabling, please refer to the table below for pin definition of the Alarm I/O setting
Pin Definition Pin Definition
1
ALARM_OUT_NO_1
7 ALARM_OUT_COM_2
2
ALARM_OUT_NC_1
8 GND
3
ALARM_OUT_COM_1
9 ALARM_IN_4
4
GND
10
ALARM_IN_3
5
ALARM_OUT_NO_2
11
ALARM_IN_2
6
ALARM_OUT_NC_2
12
ALARM_IN_1
Before Login to the Camera _____
A client program will be automatically installed on your PC when connecting to the network Speed
Dome Camera. Before logging in to the Dome Camera, please ensure downloading the ActiveX
control is allowed by either changing the ActiveX controls and plug-ins or setting Internet’s security
level to default. For further details, please refer to the network Speed Dome Camera’s Software
Guide.
ActiveX Controls and Plug-ins Settings Internet Security Level
Step 1: Start the Internet Explorer (IE).
Step 2: Select from the main menu of
the browser. Then Click on Options>.
Step 3: Click on the tab and select
“Internet”, and click on
to change ActiveX settings.
Step 4: Set “ActiveX controls and plug-ins”
items to or .
Step 1: Start the IE.
Step 2: Select from the main
menu of the browser. Then Click
on .
Step 3: Click on the tab and
select “Internet.”
Step 4: Down the page, press “Default
Level” and click on to
confirm the setting. Close the
browser window, and open a new
one later for accessing the IP
Camera